China Drop Forged Conveyor Chain for Agriculture Forged Machinery Parts safety chain for bush hog

Product Description

DESCRIPTION

Craft forging
Design P100-P260
Material 40Cr(hardness 30-37HRC),35CrMo(hardness38-42HRC),
42CrMo(hardness38-42HRC),20CrMnTi(carburization:forty five-55HRC,Carburized layer0.35-.55mm)
Generation capability 120000 items/month
OEM/ODM Available
Heat treatment Mesh belt continuous procedure furnace, secure quality
Screening technique Hardness screening,Mechanical performance tests,Effect test,
Magnetic particle inspection

Product P T t h H b d
S16 100 thirty 15 27 8 sixteen 14
Z16 one hundred 40 18 35 12 twenty 17
S20 one hundred twenty five 34 16 33 ten 18 seventeen
Z20 125 fifty 24 48 15 26 twenty
S30 142 46 22 forty nine fourteen 23.5 25
Z30 142 sixty four 28.5 fifty eighteen 30.five twenty five
142N 142 43 19 fifty 12.two 21 twenty five
YD315 142 60 28 fifty fifteen thirty 25
X3001 142 35 15 40 thirteen seventeen 18
3001 142 fifty 23 forty twelve 25 21
G261A 142N 142 forty three 19 fifty 13 21 25
G262A 142 62 29 51 16 thirty 25
142STD A-1106 142 43 20 52.5 thirteen 21 twenty five
142HVY A-1110 142 62 28.5 50 16 30 25
142X50X19 142 forty two eighteen.five fifty 13 20 twenty five
142X55X29 142 62 28.5 55 15.5 30 twenty five
150 150 38 eighteen forty 10 twenty 18
YD250 a hundred and fifty 38 18 40 ten 19 eighteen twenty
S25 a hundred and sixty 48 23 forty thirteen 25 20
Z25 a hundred and sixty fifty eight 28 55 eighteen thirty 25
P160E a hundred and sixty 43 twenty fifty 12 22 25
MS32 200 forty two twenty 50 twelve 22 twenty 25
MS55 200 eighty 35 70 25 38
YD310 200 43 20 47 twelve 22 twenty
ML40 two hundred forty eight 23 58 eighteen twenty five twenty five
NJB640 two hundred 52 25 sixty 25 28 25
3006 200 65 30 70 24 33
MG20 two hundred 70 27 70 twenty 29
A-1173 142 forty two 19.5 fifty thirteen 21.3 twenty five
A-1174 142 42 19.5 50 thirteen 21.3 twenty five
A-3634 216 64 26 seventy two 20 28.five 35
P260 260 seventy two 32 seventy five twenty 34 32
X63 250 60 28 70 20 thirty 25

About WXIHU (WEST LAKE) DIS.
Found in 2003,ZheJiang CZPT Precision Casting&Forging Inc. is a company for construction machinery areas this kind of as excavator bucket tooth,bucket adapter,aspect cutter,aspect protectorforged pipe clamp
for concrete pump truckdrop solid chain for scraper conveyor.

About Production Approach
we have 400T/1000T/1600T/2500T friction press equipment,a single 1250T horizontal forging and upsetting device,and 1 4800T Multidirectional hydraulic forging device for .1KG-50KG forgings.So we can entirely make put on parts as customer’s drawing or sample.

About Good quality Control
we have a QC group and inspection equipment like
chemical composition analyzer,mechanical residence examination device and 3D detector and so on.

About In addition
Found in 2571,ZheJiang In addition Import&Export Investing Co.,Ltd. is WXIHU (WEST LAKE) DIS.’s income organization who is responsible for foreign trade organization.

Why Decide on WXIHU (WEST LAKE) DIS.&Furthermore?
1.we are specialist company for 19 a long time expertise in our market.
two.we have diverse casting line and forging line for .1KG-2TONS components.
3.we have handed qualification and quality evaluation a lot of moments by some popular organization like
ESTI,SUNWARD,ZOOMLION,CASCADE etc.

We are in HangZhou city,ZheJiang province-Hometown of the 3 Gorged Dam!
Welcome to visit our manufacturing facility and success together!

FAQ
Q1.Are you a manufacturer or a buying and selling company?
we are absolutely company of machinery parts.

Q2.Can i get samples for checking the good quality?
we can offer totally free samples,but you require to shell out the freight.

Q3.What is your MOQ?
For regular prodcuts,we do not have MOQ.
For customerized products,we will notify you MOQ dependent on your drawing.

This autumn.What’s your shipping time?
it is about 7-forty five times dependent on your quantity.

Q5.What is actually your payment terms?
SumAmount≥5000USD,T/T 30% as deposit,balance just before shipping.

Q6.Can i check out your factory?
we always welcome you to check out our manufacturing facility.
You can can get air plane to SANXIA airport or get large-velocity rail to HangZhou station,
we will choose you up in progress.

Q7.What variety of products do you supply?
We primarily create excavator bucket teeth like casting tooth and forging teeth
fall cast chain for scraper conveyorforged pipe clamp for concrete pumpnew patented
a single piece casting bucket&ripperand we can also make .1KG-2TONS parts as your drawing or sample.

Q8.How lengthy must we consider a quotation?
Soon after acquiring thorough information,we will quote you inside of 24 several hours.

Q9.How about the quality?
We can make in accordance to customer’s requirement,these kinds of as chemical composition and mechanical residence.
we are provider for ESTI,SUNWARD,ZOOMLION,these renowned manufacturer and so forth.

Q10.How about the guarantee?
we guarantee all our spare parts towards breakage.
if any of these parts split below standard doing work circumstances we will supply a new part totally free of charge.

US $5
/ Piece
|
100 Pieces

(Min. Order)

###

Material: Alloy
Structure: Forging Chain
Surface Treatment: Polishing
Chain Size: P100-P260
Feature: Heat Resistant
Certification: CE/ISO 9001:2015

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Craft forging
Model P100-P260
Material 40Cr(hardness 30-37HRC),35CrMo(hardness38-42HRC),
42CrMo(hardness38-42HRC),20CrMnTi(carburization:45-55HRC,Carburized layer0.35-0.55mm)
Production capacity 120000 pieces/month
OEM/ODM Available
Heat treatment Mesh belt continuous operation furnace, stable quality
Testing method Hardness testing,Mechanical performance testing,Impact test,
Magnetic particle inspection

###

###

###

###

###

###

MODEL P T t h H b d
S16 100 30 15 27 8 16 14
Z16 100 40 18 35 12 20 17
S20 125 34 16 33 10 18 17
Z20 125 50 24 48 15 26 20
S30 142 46 22 49 14 23.5 25
Z30 142 64 28.5 50 18 30.5 25
142N 142 43 19 50 12.2 21 25
YD315 142 60 28 50 15 30 25
X3001 142 35 15 40 13 17 18
3001 142 50 23 40 12 25 21
G261A 142N 142 43 19 50 13 21 25
G262A 142 62 29 51 16 30 25
142STD A-1106 142 43 20 52.5 13 21 25
142HVY A-1110 142 62 28.5 50 16 30 25
142X50X19 142 42 18.5 50 13 20 25
142X55X29 142 62 28.5 55 15.5 30 25
150 150 38 18 40 10 20 18
YD250 150 38 18 40 10 19 18 20
S25 160 48 23 40 13 25 20
Z25 160 58 28 55 18 30 25
P160E 160 43 20 50 12 22 25
MS32 200 42 20 50 12 22 20 25
MS55 200 80 35 70 25 38 28 30 33 35
YD310 200 43 20 47 12 22 20
ML40 200 48 23 58 18 25 25
NJB640 200 52 25 60 25 28 25
3006 200 65 30 70 24 33 28 30 32
MG20 200 70 27 70 20 29 28 30 35
A-1173 142 42 19.5 50 13 21.3 25
A-1174 142 42 19.5 50 13 21.3 25
A-3634 216 64 26 72 20 28.5 35
P260 260 72 32 75 20 34 32
X63 250 60 28 70 20 30 25
US $5
/ Piece
|
100 Pieces

(Min. Order)

###

Material: Alloy
Structure: Forging Chain
Surface Treatment: Polishing
Chain Size: P100-P260
Feature: Heat Resistant
Certification: CE/ISO 9001:2015

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Craft forging
Model P100-P260
Material 40Cr(hardness 30-37HRC),35CrMo(hardness38-42HRC),
42CrMo(hardness38-42HRC),20CrMnTi(carburization:45-55HRC,Carburized layer0.35-0.55mm)
Production capacity 120000 pieces/month
OEM/ODM Available
Heat treatment Mesh belt continuous operation furnace, stable quality
Testing method Hardness testing,Mechanical performance testing,Impact test,
Magnetic particle inspection

###

###

###

###

###

###

MODEL P T t h H b d
S16 100 30 15 27 8 16 14
Z16 100 40 18 35 12 20 17
S20 125 34 16 33 10 18 17
Z20 125 50 24 48 15 26 20
S30 142 46 22 49 14 23.5 25
Z30 142 64 28.5 50 18 30.5 25
142N 142 43 19 50 12.2 21 25
YD315 142 60 28 50 15 30 25
X3001 142 35 15 40 13 17 18
3001 142 50 23 40 12 25 21
G261A 142N 142 43 19 50 13 21 25
G262A 142 62 29 51 16 30 25
142STD A-1106 142 43 20 52.5 13 21 25
142HVY A-1110 142 62 28.5 50 16 30 25
142X50X19 142 42 18.5 50 13 20 25
142X55X29 142 62 28.5 55 15.5 30 25
150 150 38 18 40 10 20 18
YD250 150 38 18 40 10 19 18 20
S25 160 48 23 40 13 25 20
Z25 160 58 28 55 18 30 25
P160E 160 43 20 50 12 22 25
MS32 200 42 20 50 12 22 20 25
MS55 200 80 35 70 25 38 28 30 33 35
YD310 200 43 20 47 12 22 20
ML40 200 48 23 58 18 25 25
NJB640 200 52 25 60 25 28 25
3006 200 65 30 70 24 33 28 30 32
MG20 200 70 27 70 20 29 28 30 35
A-1173 142 42 19.5 50 13 21.3 25
A-1174 142 42 19.5 50 13 21.3 25
A-3634 216 64 26 72 20 28.5 35
P260 260 72 32 75 20 34 32
X63 250 60 28 70 20 30 25

Roller Chain Maintenance Tips

There are many things to keep in mind when maintaining a roller chain. The main reasons include friction and external influences. Without proper lubrication and adjustment, such chains will wear prematurely. Here are some tips for keeping your roller chain in top shape. continue reading! This will make your process easier. We will also discuss the cost of the new roller chain. As always, remember to check for loose ends and adjust the chain regularly.
chain

Preloading

Roller chains are designed to accommodate many different types of loads. Sprockets are the main cause of chain wear. Axial and angular misalignment occurs when the sprocket faces are not properly aligned. Both types of misalignment increase stress and wear on the roller chain. They can also negatively affect the drive. Therefore, choosing the right chain is an important consideration.
Preloading helps to eliminate initial elongation and extend service life. The benefits of preloading can be seen in the preloading chart. Significant elongation occurs during drive startup with no or minimal preload. This is due to the surface hardness of the worn parts. On the other hand, a properly preloaded chain shows little elongation during the initial start. Therefore, proper preload can prolong wear life.
Although elongation is a natural phenomenon in any drive, it can be minimized or eliminated with proper maintenance. In addition to regular inspections, you should do a full inspection of your chain after the first hundred hours. This inspection should focus on key life factors such as 3% elongation, how the chain is lubricated, and any other issues that may affect life. A good quality chain should have the longest life and no problems.
There are many different roller chain specifications. A good rule of thumb is to choose chains with at least five links. Then, tighten the chain until a break occurs, and it will tell you what kind of break occurred. Alternatively, you can use a roller chain with the maximum allowable load. As long as the MAL doesn’t exceed that number, it’s still perfectly safe to use it for any application.

lubricating

When it comes to lubrication, there are several different techniques. For example, spray lubrication is a popular method for high-horsepower drives and high-load and fast-moving machines. This method is very effective, but it is expensive, and spraying the chain too far out of the guard can cause leaks. Another common method is brush lubrication. Brush lubrication involves applying a continuous flow of oil to the chain, pushing it into the chain. This lubrication technique reduces the application temperature of the chain. Also, it can extend the life of the chain, depending on the manufacturer’s specifications.
While the lubrication of roller chain couplings varies by application, sprocket hubs should be lubricated monthly to ensure proper sealing. The amount of oil used depends on the rotational speed and the type of roller chain coupling. In general, lubricants used in roller chain couplings should have excellent adhesion, oxidation, and mechanical stability.
Wear-resistant lubricants are recommended. They prevent the rollers from sticking to each other and prevent rusting. These lubricants have low surface tension and are not harmful to metal or O-ring chains. The optimum lubrication method depends on ambient temperature, horsepower, and chain speed. Properly lubricating a roller chain increases the life of the chain and reduces the risk of wear.
Proper lubrication of the roller chain is essential to prevent corrosion and prolong its service life. The oil forms a smooth film on the chain components, reducing metal-to-metal contact and minimizing friction and wear. Additionally, the oil provides a smooth running surface and reduces noise. However, the running-in process of roller chain lubrication cannot be underestimated. When using heavy-duty oils, ensure that the lubricant is compatible with operating and ambient temperatures.

Maintain

To extend the life of your roller chain, you need to carry out regular inspections. First, you should check the T-pin on the link plate at the joint. If they are not connected properly, it can cause the chain to stretch and not maintain proper spacing and timing. Next, you should look for unusual noise, corrosion, and dirt that may indicate wear. If you notice any of these problems, it’s time to replace the chain.
In order to properly maintain a roller chain, both areas of the roller chain must be lubricated with the correct lubricant. Lubricants used should be SAE non-degreased oils. There are several types of lubricants available, but the best one is a petroleum-based oil with a high viscosity. You can also check for signs of wear, such as red or brown discoloration. This means that there is not enough lubrication.
While the life expectancy of a roller chain is unknown, it is important to know how to extend its life and maximize its effectiveness. Improper tension and alignment can shorten its life and place undue stress on the drive system and the chain itself. Incorrect tension can also lead to slippage and increased energy output. Therefore, you should calculate the tension and alignment of the chain during the initial installation. Check and adjust regularly.
Another way to extend the life of your rollers is to thoroughly clean the inside and outside of the rollers. You should also lubricate it frequently to prevent excessive heat buildup. Designed to prevent overheating by limiting the amount of work during break-ins. Additionally, regular inspections will help you catch anomalies early enough to stop operations. Last but not least, regular lubrication will prolong the life of the roller chain.

Cost

Buying a roller chain is a big decision, but initial cost shouldn’t be the only consideration. The cost of the roller chain itself, as well as the running costs, should be considered. Even the lowest-priced chains can be more expensive in the long run. Additionally, maintenance and energy costs may increase. The best roller chain for your business will be the one that best suits your needs. Listed below are some considerations to consider when purchasing a roller chain.
First, what material should you use? Roller chains come in many different materials. Stainless steel is a commonly used material in construction. Materials are selected based on the cost and design of chain horsepower transmission. Various manufacturing processes will determine which material is suitable for your application. Also, the weight of the chain will vary depending on its pitch and the construction technique used. A large part of the cost of a roller chain is on the drive sprocket.
Another consideration is installation cost. Roller chains are commonly used in agricultural and transportation applications, especially for agronomic products. If lubrication is your concern, maintenance-free chains are the best choice. Corrosion-resistant chains are ideal for wet environments. They are sold in boxed lengths, so replacing a longer length requires adding a shorter length. To avoid trouble, use the skateboard to help connect the links.
Another consideration is the overall width. The overall width of an open #40 roller chain may vary but should be at least 10 feet wide. Although it is not the most expensive type of roller chain, it will last longer. Using it correctly will increase its overall longevity, so it’s a good idea to choose it wisely. If your business uses roller chains regularly, the cost reduction is well worth it.
chain

Application

A roller chain consists of a pair of alternating pins and roller links. The pins are pressed into the side panels and hinged to the rollers. Roller chains can be single or multi-strand, connected by a common pin. The multi-strand design provides higher shear strength for demanding power transmission applications. Typical applications for roller chains include conveyors, hoists, and other mechanical equipment.
The horsepower capability of a roller chain is limited by several factors, including pin shock and friction. While research into these factors has placed some limits on the maximum operating speed of the roller chain, practical experience has shown that these systems can be used at higher speeds. Proper lubrication and cooling can increase the durability of these chains. In addition, roller chain applications include:
Drive and conveyor systems are the two main uses of roller chains. During driving operations, wear and elongation are a natural part of the operation. However, lubrication plays a vital role in minimizing wear and shock loads. Therefore, wear is inevitable and special care must be taken to ensure proper lubrication. Additionally, lubrication reduces heat dissipation in the chain.
The materials used to make roller chains vary from one type to another. Stainless steel is common, but nylon or brass are sometimes used. These materials are less expensive and more durable than steel or stainless steel. The best material for the job depends on a variety of factors, including cost, environmental conditions, and design horsepower transmission. For example, the pin bushing contact area is a critical area requiring lubrication. Additionally, some coatings are designed to retard the corrosive effects of water or oil.
China Drop Forged Conveyor Chain for Agriculture Forged Machinery Parts     safety chain for bush hogChina Drop Forged Conveyor Chain for Agriculture Forged Machinery Parts     safety chain for bush hog
editor by czh 2022-12-01

Steel Chain

As one of the steel chain manufacturers, suppliers, and exporters of mechanical products, We offer steel chain and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of steel chain.

Recent Posts